Greenville Concrete Lifting logoGreenville Concrete LiftingGreenville, TX
Concrete Leveling photo

Greenville Concrete Lifting

Concrete Slab Lifting & Leveling in Greenville, TX

Concrete slab lifting and leveling in Greenville, TX. Void mapping, foam or slurry injection, no demolition. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Greenville and nearby communities.

A sinking slab is not a foundation problem, most of the time. It's soil moving under a flat surface that has nothing to hold it up but dirt. Greenville Concrete Lifting handles the general case: any slab that's dropped, cracked at the edges, or gone out of level, whether it's a walkway, patio border, or a spot that doesn't fit neatly into one category.

We map the void first, then pick foam or slurry based on slab thickness and how deep the gap runs. This page covers the general slab lifting process; specific slab types (driveways, garage floors, pool decks) have their own dedicated pages if that's closer to your situation.

What's included

What's Included

  • Void mapping — probing the slab to find where the gap sits and roughly how big it is.
  • Method selection — choosing foam or slurry based on slab thickness and access.
  • Injection and lift — pumping material in stages while checking grade.
  • Joint and crack check — noting any joints or cracks that need sealing after the lift.
  • Final grade verification — straightedge check across the slab before sign-off.

How it works

How Our Concrete Slab Lifting & Leveling Process Works

  1. Assess height difference photo
    Step 1

    Initial assessment

    Inspect the slab and note the settlement pattern.

  2. Method selection photo
    Step 2

    Void probing

    Locate the depth and rough size of the gap below.

  3. Mark injection points photo
    Step 3

    Method selection

    Pick foam or slurry for this slab's thickness.

  4. Mark injection points photo
    Step 4

    Drilling access points

    Small holes drilled at planned injection spots.

  5. Lift and level check photo
    Step 5

    Injection and lift

    Material pumped in until the slab reaches grade.

  6. Seal joints photo
    Step 6

    Grade check

    Straightedge run across the surface to confirm level.

  7. Hole patching photo
    Step 7

    Hole patching

    Seal every access point flush with the concrete.

  8. Follow-up check photo
    Step 8

    Cleanup and walkthrough

    Clear the site and review the finished work.

Cost

What Does a Concrete Slab Lifting & Leveling Cost in Greenville?

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits, Codes, and Compliance for Concrete Slab Lifting & Leveling

Check with Hunt County or the city of Greenville before scheduling if your project is close to that line.

Typically needs a permitOften no permit
Void filling tied to a permitted structural additionResidential slab releveling on an existing footprint
Slab work that changes footprint or affects a public right-of-wayInterior or backyard slab lifts with no structural tie-in
Commercial slab jobs subject to county inspectionCosmetic joint sealing after the lift is complete

DIY vs pro

DIY vs Hiring a Pro for Concrete Slab Lifting & Leveling

DIYHire a pro
Sealing hairline surface cracks with concrete caulk.Mapping a void accurately requires probing tools most homeowners don't own.
Cosmetic patching on chipped edges that aren't tied to settling.Wrong injection ratio can crack a slab that was otherwise fine.
Minor joint resealing on a slab that hasn't moved.Pro equipment controls lift height in small increments, not guesswork.
A properly filled void resists Hunt County's seasonal clay cycles instead of resettling within a year.

Before & after

Before and After Concrete Slab Lifting & Leveling

  • Concrete Slab Lifting & Leveling photo
    Before
  • Concrete Slab Lifting & Leveling photo
    After

FAQs

Concrete Slab Lifting & Leveling FAQs

Can you lift a concrete slab without tearing it out?

That's the whole point of this service. Small holes get drilled, material gets pumped underneath, and the slab floats back up on its own weight. No jackhammer, no new pour.

How do I know if it's the foundation or just the slab settling?

Foundation issues usually show up as cracks in interior walls, doors that stick, or diagonal cracking on brick. A slab settling on its own is more localized: one section of concrete dropping while the structure above stays put. When in doubt, we'll take a look during the estimate and tell you straight.

What's the difference between foam and slurry for this job?

Foam is lighter, cures fast, and works well for thinner or moisture-sensitive slabs. Slurry is heavier, costs less per square foot, and suits thicker slabs with bigger voids. We pick based on your specific slab.

Does this fix the crack too, or just the height?

Lifting closes the void causing the drop. Cracks that opened up from the settling often get sealed as part of the job, but a crack from a different cause (like rebar corrosion) needs a separate look.

Next step

Get a Concrete Slab Lifting & Leveling Estimate in Greenville

Call (903) 494-6406 or request a free estimate. We'll check the slab, map the void, and tell you which method fits before we touch a drill.

Home | Contact | Mudjacking / Slabjacking

Ask about Concrete Slab Lifting & Leveling

Tell us about the project and how to reach you.

Call (903) 494-6406