Greenville Concrete Lifting logoGreenville Concrete LiftingGreenville, TX
Commercial Foundation Void Filling photo

Greenville Concrete Lifting

Foundation Void Filling (Polyurethane Injection) in Greenville, TX

Foundation void filling with polyurethane injection in Greenville, TX. Closed-cell foam, same-day cure. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Greenville and nearby communities.

Ever wonder why a door starts sticking in the same season every year? Blackland Prairie clay under Hunt County shrinks away from a foundation edge when it dries out, leaving a gap that nobody sees until the slab or footing above it settles into it.

Greenville Concrete Lifting fills that gap with closed-cell polyurethane foam, injected through ports smaller than a driveway drill hole. The foam expands to fill the void and stops the settling at its source, instead of just patching whatever crack showed up on the surface.

What's included

What's Included

  • Void location — pinpointing where the gap sits along the foundation or slab edge.
  • Small-diameter port drilling — minimal holes, about the size of a pencil.
  • Foam injection — expanding foam pumped to fill the void completely.
  • Lift monitoring — tracking movement in real time as foam expands.
  • Port patching — sealing each injection port flush with the surface.

How it works

How Our Foundation Void Filling (Polyurethane Injection) Process Works

  1. Lot assessment photo
    Step 1

    Void assessment

    Locate the gap and estimate depth along the foundation line.

  2. Port marking photo
    Step 2

    Port marking

    Mark injection points spaced to cover the full void.

  3. Injection hole drilling
    Step 3

    Drilling ports

    Small-diameter holes drilled at each marked point.

  4. Lift and level check photo
    Step 4

    Foam injection

    Closed-cell foam pumped in and monitored as it expands.

  5. Lift check photo
    Step 5

    Lift check

    Verify movement with level readings during injection.

  6. Port sealing and cleanup photo
    Step 6

    Port sealing

    Patch each hole so it's flush with the surrounding surface.

Codes & permits

Permits, Codes, and Compliance for Foundation Void Filling (Polyurethane Injection)

Confirm with Hunt County or the city of Greenville if your situation involves a structural repair.

Typically needs a permitOften no permit
Void filling tied to a permitted structural repair or additionResidential void filling under an existing slab with no structural modification
Work required as part of a foundation engineering reportFoam injection addressing a slab-to-foundation gap with no footprint change
Commercial foundation jobs subject to county inspectionInterior floor void fill with no exterior work

Before & after

Before and After Foundation Void Filling (Polyurethane Injection)

  • Foundation Void Filling (Polyurethane Injection) photo
    Before
  • Foundation Void Filling (Polyurethane Injection) photo
    After

FAQs

Foundation Void Filling (Polyurethane Injection) FAQs

Does homeowners insurance cover slab settling from clay soil?

Usually not. Most standard policies treat gradual soil movement as normal wear, not a covered event. Some foundation-specific riders exist, but that's a conversation for your insurance agent, not something we can promise.

Can polyurethane foam handle the freeze-thaw we get in North Texas?

Closed-cell foam is built for exactly that kind of cycling. It doesn't absorb water the way slurry can, so freeze-thaw swings don't break it down the same way.

Why does void filling stop repeat settling when other patches don't?

Surface patches cover the symptom. The clay keeps shrinking and swelling underneath, so the gap comes back. Filling the void with foam removes the empty space the soil movement was creating in the first place.

How is this different from mudjacking?

Foam injection uses small ports and lightweight material, which suits precise foundation-edge work. Mudjacking uses bigger holes and heavier slurry, better suited to large flat slabs like driveways.

What signs mean I need void filling instead of just slab leveling?

Door and window sticking, hairline cracks near the foundation line, and a widening gap between slab and wall point to a foundation-adjacent void rather than a flat-slab settling issue.

Next step

Get a Foundation Void Filling (Polyurethane Injection) Estimate in Greenville

Call (903) 494-6406 or request a free estimate. Greenville Concrete Lifting will locate the void, explain what's causing it, and give you a written number before drilling a single port.

Home | Contact | Concrete Slab Lifting & Leveling

Ask about Foundation Void Filling (Polyurethane Injection)

Tell us about the project and how to reach you.

Call (903) 494-6406